Frequently Asked Questions
If you have a specific question that our FAQ’s don’t cover, be sure to contact us.
How does AgriAir purification work?
AgriAir purifiers produce Ionized Hydro-Peroxides (IHP), oxidizing gas molecules, by UV energy reacting with a quad metallic shield. The IHP is generated from humidity and O2 in the air without adding any chemicals. The IHP oxidizer plasma is exhausted in the air, where it proactively seeks any type of bio-contaminant to destroy. The unused oxidizer plasma reverts back to humidity and oxygen in about 15 minutes, leaving no chemical residues behind. The cycle of IHP oxidizer plasma generation, reaction with contaminants, and breakdown to O2 and humidity is going on 24/7, sanitizing and protecting your plants.
Is Ionized Hydroperoxide safe for plant, animal and human exposure?
Ionized hydro-peroxides occur in nature in levels similar to those produced by our purifiers, or about 0.03 ppm which is 30 times lower than the OSHA limit.
Does an AgriAir Purifier alter the quality of the harvested crop, THC or CBD?
Based on independent lab reports, the harvest retained its normal quality while mold and fungus were eliminated. Independent labs show no loss of cannabinoids, trichomes, taste, or terpenes from the final product.
Does IHP reduces the level of CO2 in the air?
The CO2 levels are not affected at all by the IHP oxidizer plasma.
How much space does each purifier sanitize?
As an example the purifier with a single 14” generator can sanitize and control odor in about 8,000 cubic ft. of space with 100 plants. The unit with 9 “ and 14” generators can run on Low output and cover 6,000 cubic ft., at Medium 8,000 cubic ft. and at High, 14,000 cubic ft. of space with over 175 plants. The purifiers with two 14” generators can effectively sanitize over 16,000 cubic ft. of space with over 200 plants. These are only guidelines and in our experience these units can sanitize and control odor in considerably larger areas. It is important to have air constantly moving in the grow area to distribute IHP to the entire area.
How does installing an AgriAir purifier benefit my grow operation and save me money?
The AgriAir purifier sanitizes the air and surfaces in the grow area, thus greatly reducing the need for fungicides and pesticides to keep plants healthy. It kills pollen, viruses and molds such as Aspergillum and Botrytis, which can destroy entire crops. IHP also prevents mold from growing on the HVAC system and kills the mold spores in the air. Another benefit of the AgriAir purifier is the removal of the odor and VOCs inside the grow area, eliminating the need for a carbon filtration system for the exhausted air.
How much service does the AgriAir purifier require?
AgriAir purifiers contain particulate filters which capture pollen, dust and mold spores and should be replaced when loaded with contaminants. Some AgriAir purifiers contain carbon filters which block any visible light radiating from the unit and don’t need to be replaced frequently. The IHP generator cell, which contains UV light, slowly loses its capacity and after 25,000 hours of operation (over 2.5 years) should be replaced. All service can be done by an operator in the field.
Does the AgriAir purifier emit any light or heat?
Any light which could interfere with the night cycle is blocked. When operating with two AgriAir generators only about 80 watts are required, so heat is not an issue. Some purifiers also contain blowers which produce a minor amount of heat, but benefit the grow by distributing IHP oxidizers and filtering out airborne contaminants.
What is the best way to install an AgriAir purifier unit?
Most AgriAir purifiers are portable and easy to set up without ducting and require only a 115 Volt outlet. The units are designed to generate IHP gas which mixes with air circulating inside the grow area. These units should be installed elevated above the floor or hanging from the ceiling. This will assure complete mixing of exhausted peroxides with the air in the grow or processing area. As an optional accessory, the units could be ordered with flexible ducting to direct the Hydro-peroxide rich exhaust to any area desired.
Does the AgriAir purification process generate Ozone?
The AgriAir purifier is not an Ozone generating machine. Its purification action utilizes the oxidation process where Ionized Hydro-Peroxides add or remove an oxygen molecule from the organic contaminants to destroy them. An independent test showed that the Ozone [O3] level in the tested area remained unchanged and at very low levels.
Where should I use the PCO purifier with HEPA filter?
The drying period is a critical time in the grow process when the cannabis can easily get moldy and contaminated. During this time, we recommend our purifiers with PCO generators to sanitize the entire processing environment and with HEPA filters to enhance the process by capturing even submicron contaminants.
Is the AgriAir effective on destroying formaldehyde?
Our purifiers effectively eliminate formaldehyde and many other chemical fumes and VOCs.
Could I use the AgriAir purifier for rapid sanitation of a contaminated area?
We recommend sanitizing your grow area thoroughly before each new cycle, and then set up the AgriAIr purifiers to maintain sanitization of the space 24/7. If use of the purifiers begins in an environment with sick plants containing powdery mildew for example, the existing mildew will be brought under control and will not spread to healthy plants. Depending on the level of the bio-contamination and the size of the space, multiple units can be used to control highly contaminated areas; increasing the concentration of IHP without harming the plants. While the IHP is considered safe for human exposure, each operator must determine how to maintain a safe and comfortable IHP level while the area is occupied.
What are the important factors to consider when choosing AgriAir Purifiers for a contained grow environment?
- Goals – What are the goals I’m trying to achieve – control of odors, mold, mildew, fungus, microbes?
- Size – The total cubic feet of the grow space determines how many AgriAir purifiers are required to generate the amount of peroxides needed to purify the whole space.
- Distribution of Peroxides – The IHP plasma generated by the purifiers has to be exhausted into air circulating in the grow space. Turbulent airflow through the grow space is necessary to assure an even distribution of peroxides and to achieve complete sanitation of plants and surfaces.
How do I know if I have enough concentration of IHP in the air in a contained grow environment?
If odors are greatly reduced within one hour, it is a good indication that the IHP level is sufficient for sanitizing the air & surfaces. It is important to watch your plants closely assuring they remain healthy, mold and mildew free, and calibrating the level of hydro peroxides in your grow space appropriately. The ultimate purpose of the PCO purification process is to have healthy plants without using chemical pesticides and fungicides. Another indication that the purifiers are working is that the HVAC system stays clean of mold or is gradually purified of existing mold after use of AgriAir purifiers.
How does the AgriAir purifier compare with the use of carbon filters?
Carbon filters remove odor and VOCs from the air exhausted to the outdoors and create negative pressure inside the building, allowing pollen and other contaminants to leak into the grow area. Also, carbon filters will not sanitize the air and surfaces inside your grow space. AgriAir purifiers remove odors inside the grow area, sanitize the air and hard surfaces, prevent growth of mold inside HVAC systems, and create a healthy environment for plants and workers. Our purifiers also enable growers to reduce the use of fungicide and pesticide. While the carbon filter initially costs less to install, the replacement of filter media along with the maintenance of the units makes this system more expensive to operate than AgriAir purifiers.
Can AgriAir purifiers sanitize existing contaminated HVAC systems?
Yes, the IHP molecules destroy mold growth in the HVAC system and ducting. This can be done gradually, during the normal air sanitizing process, or rapidly, by sending the AgriAir purifier output directly into the intake of the HVAC unit.
Are AgriAir purifiers effective in greenhouses?
AgriAir purifiers provide multiple functions in greenhouse applications to keep the plants and the environment healthy.
- They purify incoming outside air by deactivating pollen, mold spores, virus and bacteria.
- Kill mold, mildew, fungus and bacteria generated inside the green house.
- Reduce or eliminate odor from the air before it is exhausted to the outside.
How much hydro peroxide is required to provide complete sanitation and control odors in the green house?
There are many variations of greenhouse construction and methods of growing crops. Also variations in the climate from hot, wet, dry, cold and seasonal changes in the environment need to be considered. AgriAir purifiers generate strong peroxide molecules which are exhausted and mixed into the surrounding turbulent air where they pro-actively seek and destroy bio-contaminants. These peroxides are active for about 15 minutes, during which time they either react with bio-contaminants or convert back to O2 and humidity. Each AgriAir purifier, depending on the number and size of its IHP generators, can release enough peroxides to purify from 3,000 to 16,000 cubic feet of air. Depending on the size, its operation and required level of purification, multiple units can be installed throughout the greenhouse to maintain an elevated level of Ionized-Hydro-Peroxide in the air to continuously destroy bio-contaminants. Our modular approach using Agriair purification units provides maximum flexibility to respond to changing conditions inside and outside the greenhouse.
What are the important factors to consider when choosing AgriAir Purifiers in my greenhouse?
- Goals – What are the goals I’m trying to achieve – control of odors, mold, mildew, fungus?
- Size – The total cubic feet of the greenhouse determines how many AgriAir purifiers are required to generate the amount of peroxides needed to purify the whole space.
- Air Flow – The number of air changes per hour inside the greenhouse has to be considered when calculating the number of purifiers required.
- Distribution of Peroxides – A turbulent airflow through the greenhouse is necessary to assure an even distribution of peroxides through the whole space to achieve a complete sanitation.